RS125
4.4.5.
RAVE VALVE INSTALLATION
•
Remove the fuel tank, see (REMOVING THE FUEL
TANK).
•
Remove the battery along with its box mount, see
(REMOVING THE BATTERY).
•
On derated vehicles, remove the fixed slide valve by
unscrewing the two screws (1) and collect the washers
before installing the RAVE valve.
COMPLETE INSTALLATION
•
Insert the exhaust valve assembly complete with
gasket (5) into the cylinder.
NOTE Always use a new gasket (5) on refitting.
•
Install the exhaust valve assembly using the two
screws (1) with washers of the fixed slide valve.
•
Install the control unit and secure it to the battery
mount frame using the two screws (2).
•
Connect the control unit connector to the system.
ENGINE
4 - 33