Shock Absorber - APRILIA TUONO R FACTORY 2007 Service Station Manual

Suspensions
Adjusting
BEARINGS
Make the bearings turn manually; they must rotate
smoothly, continuously and silently.
There must be no axial clearance.
Replace the bearings if they present these prob-
lems.
Apply grease on the rollers.
GASKETS
Check that the gaskets are in good conditions; re-
place them if they show signs of damage or ex-
cessive wear.

SHOCK ABSORBER

Check that the shock absorber shows no oil leaks
and that it moves smoothly and progressively.
Otherwise, replace the shock absorber.
Standard shock absorber
CHECK THAT NO COMPONENT IS EVIDENTLY DISTOR-
TED, DAMAGED, CRACKED AND/OR DENTED.
REPLACE ALL DAMAGED COMPONENTS.
Standard adjustment
Specification
Length of (pre-loaded) spring (B)
Rebound adjustment, screw (1)
SUSP - 248
S
TANDARD SHOCK ABSORBER SETTING
open 25 clicks (anticlockwise) from fully closed (clockwise)
TUONO R_FACTORY
Desc./Quantity
147 mm (5.79 in)