APRILIA RS 125 Workshop Manual page 145

RS125
• Tighten the screw retaining the engine (4) to the frame.
• Fit the connecting rods to the swinging arm.
•
Insert the screw from the right side.
•
Fit the washer and tighten the nut (5).
•
Route the brake hose along the swinging arm.
• Secure the internal brake line clamp with the screw (6).
•
Secure the brake line retainer with the screw (7).
• Install the rear wheel, see (INSTALLING THE REAR
WHEEL).
•
Install the chain, see (REFITTING THE DRIVE
CHAIN).
•
Lower the hoist arm.
• Detach the slings from the frame.
•
Install the fuel tank.
CHASSIS
5 - 47