RS125
5.3.7.
INSTALLING THE FORK LEGS
•
Slide the complete slider-and-stanchion assembly
through the bottom and top yokes.
•
Insert the wheel shaft into the both fork legs to keep
the holes aligned.
•
Tighten the screw that retains the slider to the bottom
yoke.
•
Tighten the screw that retains the slider to the top
yoke.
•
Remove the wheel shaft.
•
Install the front wheel, see (FITTING THE FRONT
WHEEL).
•
Fit the front mudguard.
CHASSIS
5 - 29