CHASSIS
•
Working on either side, tighten the two screws.
•
Position the front brake calliper and tighten the two
retaining screws.
•
Lower the hoist arm.
WARNING
Before detaching the slings, make sure the rear
stand (OPT) is positioned correctly.
•
Detach the slings from the frame.
•
When through with the installation procedure, operate
the front brake and push down on the front fork
repeatedly.
•
The front fork should move smoothly and gradually and
the sliders must show no traces of oil.
NOTE Before riding the vehicle, check for correct track
alignment.
5 - 30
RS125