Removing The Rear Wheel - APRILIA RS 125 Workshop Manual

CHASSIS
5.8.2.

REMOVING THE REAR WHEEL

WARNING
Before carrying out the following operations, let
the engine and the silencer cool down until they
reach room temperature, in order to avoid burns.
When removing, pay utmost attention not to
damage the brake line, disc and pads.
NOTE Make sure to have the suitable rear support stand (OPT)
ready before removing the rear wheel.
•
Place the vehicle on the rear support stand (OPT).
•
Place a support under the tyre so the wheel will stay in
place after you release it.
•
Loosen and remove the nut (1) and collect the washer.
• Remove the wheel shaft (2) from the left side.
•
Loosen and remove the two screws and move the rear
brake calliper out of the way.
•
Loosen and remove the screw and refit the cable guide.
5 - 56
RS125