TECHNICAL INFORMATION
RS125
2.1.8.
INSTRUMENT PANEL OPERATION
CONTROLS
1) MODE button:
- press briefly to toggle between functions;
- press longer (over three seconds) to enter the setup mode.
Turn the ignition key to (" ") and the following instrument
panel lights will come on for two seconds:
- all warning lights;
- backlighting;
- all display segments.
The rev counter pointer (2) goes to full scale and then
returns to its initial position.
After the initial test routine, all instruments automatically
switch to the current readings of the relevant quantities.
Standard display configuration is as follows:
- Alarm icons, (zone A);
- Instantaneous speed, (zone B);
- Odometer / trip meter / clock / battery voltage / lap timer
(zone C) (*);
- Coolant temperature, (zone D).
(*) The display reverts to the function displayed when last
powered off
2 - 16