APRILIA RS 125 Workshop Manual page 141

RS125
• Loosen and remove the screw and remove the speed
sensor.
• Loosen the screw retaining the engine (4) to the frame
to facilitate swinging arm removal.
NOTE Make sure to have the suitable special tool part no.
8101945 (box wrench for swinging arm pivot adjustment)
ready at hand.
•
Working on the right side, loosen the ring nut (5)
completely using the suitable box wrench.
•
Loosen the ring nut adjusting bush (6).
•
Working on the left side, loosen and remove the
swinging arm pivot (7) and collect the two washers.
•
Remove the swinging arm from the frame. You will
need someone to help with this operation.
CHASSIS
5 - 43