RS125
5.5.
REAR SHOCK ABSORBER
5.5.1.
REMOVING THE SHOCK ABSORBER
•
Place the vehicle on the front support stand (OPT).
•
Place the vehicle on the rear support stand (OPT).
•
Place a support between swinging arm and seat frame
to keep the shock absorber in an unloaded state.
•
Working on the right side, loosen and remove the top
nut (1).
•
Slide out the screw on the opposite side and collect the
washer.
•
Working on the right side, loosen and remove the nut
(2).
•
Slide out the screw on the opposite side and collect the
washer.
•
Working on the left side, loosen and remove the nut
(3).
•
Slide out the screw on the opposite side.
CHASSIS
5 - 35