Settings - HP Neoware e140 - Thin Client User Manual

Settings

Printer Method
Factory default: Print to System Printer
The following printer methods are available:
Print to File
Print to System Printer
Print to Serial Device
Print to LPR
Throw page on close
Factory default: Unchecked
When this option is checked a form will be issued when closing the
printer. This is required for most page printers.
Send print data to a file. Refer to the
section "Advanced - File" on page 77 for
setup options.
Send print data to the printer connected to
your system. Refer to the section
"Advanced - System Printer" on page 71
for setup options.
Send print data to a serial device. Refer to
the section "Advanced - Serial Device" on
page 72 for setup options.
Send print data to a network printer. Refer
to the section "Advanced - LPR" on
page 75 for setup options.
Emulation Printer Settings
Printing
69