Using The Teemtalk Emulator Window - HP Neoware e140 - Thin Client User Manual

HP 700-92/96 Emulation
Using the TeemTalk
Emulator Window
106 Creating an HP 700-92/96 Emulation Session
Click to display the
Next
7
If you want a shortcut icon for this session to be created on the
8
desktop, check the box labelled
.
session
Click to create the session and exit.
OK
9
To run the session, either double-click on the desktop icon if one
10
was created for the session, or run TeemTalk, display the
menu and select
.tts session file then click
This section describes the procedure for creating an HP 700-92/96
emulation session from the TeemTalk emulator window.
Display the
Session
1
to set the transport method.
Transport...
Display the
Session
2
connection method.
Display the
Session
3
emulation to
hp70092
You can configure the transport, connection and emulation set-
4
tings by selecting the relevant
menu. The options displayed by selecting
are described in the section "Setup Options" on page 125.
To save the session, display the
5
. In the
sion as File Name
identify this session configuration for future selection, then click
. Note that session files have the filename extension .tts.
Save
To run the session, display the
6
. Select the name of the required .tts session file then click
sion
.
Open
Finalization
Create icon on desktop for
. Select the name of the required
Open Session
.
Open
menu from the menu bar and select
menu and select
menu and select
.
Configure
menu and select
File
field, enter a unique name that will
menu and select
File
dialog.
to set the
Connection...
. Set the
Emulation...
options in the
Session
Configure emulation
Save ses-
Open Ses-
File