Configuration Selection; Device Control - HP Neoware e140 - Thin Client User Manual

HP 700-92/96 Emulation
Configuration
Selection

Device Control

114 Function Keys & Buttons
This set of functions is asserted by pressing the F9 key (equivalent
to the User System key). This enables you to access three sets of
function configurations.
Device Control - F1
Clicking this button or pressing F1 will cause the
functions to be asserted. The buttons and keys F1 through F8 will
function as described in the section "Device Control" on page 114.
Margins/Tabs/Col - F2
Clicking this button or pressing F2 will cause the
functions to be asserted. The buttons and keys F1 through F8 will
function as described in the section "Margins, Tabs & Start Column"
on page 118.
Modes - F4
Clicking this button or pressing F4 will cause the
functions to be asserted. The buttons and keys F1 through F8 will
function as described in the section "Mode Selection" on page 110.
This set of functions is asserted by pressing the F9 key (equivalent
to the User System key) then F1. These functions enable you to
select the device(s) to which data is sent and also to copy portions of
data from display memory to the printer.
Device Modes - F1
Clicking this button or pressing F1 will cause the
functions to be asserted. The keys F1 through F8 will function as
described in the section "Device Modes" on page 116.
Device Control
Margins/Tabs/Col
Mode Selection
Device Modes