Notice Board Facility; Introduction; Key Functions; Copying Screen Data To The Display - HP Neoware e140 - Thin Client User Manual

Notice Board Facility

Introduction

Key Functions

Copying Screen
Data to the Display
The Notice Board is an area of the display in which copied data can
be stored and manipulated. You can display the Notice Board either
by pressing the keys Alt + F2, or by selecting the
option on the
Enabled
dialog (see "Notice Board Settings" on page 181).
Settings
When the Notice Board is enabled, pressing the Zoom key will tog-
gle the display between full screen (i.e. the screen currently contain-
ing the cursor) and split screen (host screen and Notice Board)
mode. The
Zoom Settings
of the
3270 Display Settings
played above the other. When viewing the display, pointers at each
end of the dividing line between the two screens indicate which is
the host screen.
The keys used by default for Notice Board functions are shown
below together with the equivalent virtual key names that can be
used to assign the functions to any key on the keyboard.
101/102 Key Keyboard
NB Setup: Alt + F2
Zoom: Alt + Page Up
Jump: Ctrl + Page Up
NB Copy: Ctrl + Shift + Page Up IB_NB_COPY
Copy: Shift + Page Down
Position the text cursor at the start of the area to be copied.
1
Press the Copy key to start the Copy function. Note that the
2
status line will display the key functions available.
Use the cursor keys to move the text cursor to the diagonally-
3
opposite corner of the display area to be copied. The currently
selected area will be highlighted in green. Note that you can
toggle the position of the text cursor between the two
IBM 3270 Display Emulation
Notice Board Settings
options on the
Notice Board Settings
dialog determine which screen is dis-
Virtual Key Names
IB_NB_SETUP
IB_NB_ZOOM
IB_NB_JUMP
IB_COPY
Notice Board Facility
Notice Board
tab of the
3270 Display
tab
169