Command Line Options; Introduction - HP Neoware e140 - Thin Client User Manual

Introduction

Command Line
CHAPTER 21
Options
This chapter describes the command line options that can be used
to specify the TeemTalk startup configuration.
The command line for running TeemTalk can include options that
modify its startup configuration. The options are entered after the
name of the TeemTalk application and each option must be pre-
ceded by a space.
For example, to run TeemTalk so that the configuration bar and
soft buttons are not displayed you would enter the following on the
command line:
teemtalk.exe -cfg -bl0
where -cfg removes the configuration bar and -bl0 removes the soft
buttons.
All the command line options currently supported by TeemTalk are
described in the following sections.
HP TeemTalk Terminal Emulator 7.0 User Manual
275