HP Neoware e140 - Thin Client User Manual page 51

sensitive, so make sure your
ventions for your system.
Note: When running the IBM 3270 or IBM 5250 emulation,
entries are only applicable in NVT mode.
Enter the response required in the
3
for a text entry to be sent to the host it must be followed by a
carriage return command. This is specified by selecting
in the list of predefined commands in the list box below
Return
then clicking the
box.
Respond With
You can also enter a predefined key function in the
box by selecting
With
commands in the list box below, selecting one of the virtual key
names listed in the box below that, then clicking the
button.
The list of predefined commands that can be inserted include
(indicated by <UN>) and
UserName
<PW>). Selecting either of these will cause a dialog box to pop-
up when logging on to the host prompting the user to enter a
name or password, respectively. You can also delay the script
response by 2 seconds by inserting Delay (2s) (indicated by
<D>) or 0.255 seconds by inserting Pause (0.255) (indicated by
<P>).
When you have finished specifying the response to a particular
4
prompt, click the
window on the right.
The script will perform the actions in the order displayed in the
window. To change the order of the script lines, use the
Script
up and down arrow buttons to the right of the
Repeat this procedure for each prompt as required.
5
entries follow the correct con-
Text
Respond With
button. A <CR> will appear in the
Insert
Key Definition
Password
button to add the definition to the
Add
Host Connection
box. In order
C.
Respond
in the list of predefined
Insert
(indicated by
Script
window.
Script
Auto Logon
Text
35