HP Neoware e140 - Thin Client User Manual page 89

Selecting will cause an eighth bit to be added with a value of 1
Odd
if the previous 7 bits add up to an even number, and 0 if the previous
7 bits add up to an odd number. Selecting
bit to be added with a value of 1 if the previous 7 bits add up to an
odd number, and 0 if the previous 7 bits add up to an even number.
parity will set every eighth bit to 1 and
Mark
to 0.
Word Length
Factory default: 8
This option specifies the number of data bits sent for each transmit-
ted character.
Stop Bits
Factory default: 1
This specifies the number of stop bits sent for each transmitted
character.
Flow Control
Factory default: Both
This option specifies the type of flow control used by the line port to
communicate readiness to transmit or receive data from the host.
None
Input
Output
Both
Hardware
Buffer Size
Factory default: 4096
This specifies the size of the buffer used for temporary storage of
input and output data.
No flow control.
XON/XOFF on received data.
XON/XOFF on transmitted data.
XON/XOFF on transmitted & received data.
RTS/CTS hardware flow control.
Emulation Printer Settings
Printing
will cause an eighth
Even
parity every bit
Space
73