Using The Teemtalk Emulator Window - HP Neoware e140 - Thin Client User Manual

VT Series Emulations
Using the TeemTalk
Emulator Window
82 Creating a VT Series Emulation Session
This section describes the procedure for creating a VT Series emula-
tion session from the TeemTalk emulator window.
Display the
Session
1
to set the transport method.
Transport...
Display the
Session
2
connection method.
Display the
Session
3
emulation to
VT Series
You can configure the transport, connection and emulation set-
4
tings by selecting the relevant
menu. The options displayed by selecting
are described in the section "Setup Options" on page 90.
To save the session, display the
5
. In the
sion as File Name
identify this session configuration for future selection, then click
. Note that session files have the filename extension .tts.
Save
To run the session, display the
6
. Select the name of the .tts session file then click
sion
menu from the menu bar and select
menu and select
Connection...
menu and select
Emulation...
.
Configure
menu and select
File
field, enter a unique name that will
menu and select
File
to set the
. Set the
options in the
Session
Configure emulation
Save ses-
Open Ses-
.
Open