HP Neoware e140 - Thin Client User Manual page 162

IBM 3151 Emulation
146 Setup Options
Model
Factory default: 11
This option identifies the terminal model being emulated in response
to a terminal identification request from the host. Model 11 supports
only one viewport containing 24 or 25 rows and 80 columns. Model
31 supports up to three viewports (80 or 132 columns wide) and
pass-through printing.
Operating Mode
Factory default: Echo
The setting of this option determines how keyboard entered data is
sent to the host and displayed on the screen.
In mode, keyboard entered data is sent only to the host. The
Echo
host is then responsible for returning the data to the display.
In mode, keyboard entered data is sent simultaneously to
Character
the host and the display.
In mode, keyboard entered data is displayed and processed
Block
locally, allowing you to edit it before a block of data is sent to the
host.
Terminal ID
Factory default: Unspecified
This specifies what is reported back to the host in response to a
terminal identification request. The terminal ID can be up to 20
characters long. Note that not all features of the specified terminal
may be supported.
Font
Factory default: Courier New
This enables you to specify the font to be used for displaying charac-
ters. The available settings depend on the fonts installed.