HP Neoware e140 - Thin Client User Manual page 72

Soft Buttons
56 Defining Soft Button Functions
The procedure for defining a soft button is as follows:
In the top-right panel, select the button number (
1
required level (
Lvl1
Note that selecting one of the
to specify a title for that group of buttons. The title will be
displayed on the button immediately below the
but you cannot program this button.
In the box enter the text to be displayed on the button (up to
Title
2
twenty characters).
In the box enter the function definition for the button.
Macro
3
The definition can contain key functions and control characters
to be actioned as well as normal text. Refer to the appendix
"Programming Keys & Buttons" on page 287 for details.
Double-clicking on an
that key function to the button definition.
Test the function definition by clicking the
4
If you want the function to be performed locally only, check the
5
box.
Local
Specify how many soft button levels you want to be displayed at
6
any one time using the
display up to four levels at a time with each level containing
twelve programmable soft buttons. Selecting
soft buttons from the display.
If you want the soft buttons displayed in a separate window,
7
uncheck the
Attached to the window
When you have finished defining soft button functions, click
8
.
OK
To save the soft button settings, select
9
- ).
Lvl4
button levels will enable you
Lvl#
or
Emulation Key
selection list. You can
Visible Levels
option.
File
- ) on the
B1 B12
button,
Level #
will apply
Virtual Key
button.
Play Macro
will remove the
0
> .
Save Session