Serial Transport
A serial host connection is made using the
which can be displayed using one of the following three methods:
:
Session Wizard
:
TeemTalk Window
Specify the settings required by the host using the options described
below, then click the
Communications Port
Factory default: COM3
This specifies the port used to communicate with the host.
In
set
Step 1
Transport
the
button.
Configure
On the
menu, select
Session
then select
Serial
Configure Transport...
On the configuration bar, select
list box then click
Transport
.
Transport
button.
Connect
Host Connection
dialog
Serial Settings
to
then click
Serial
>
Transport
in the
Serial
Configure
Serial Transport
.
31