HP Neoware e140 - Thin Client User Manual page 108

VT Series Emulations
92 Setup Options
ANSI BBS mode the screen size is adjusted to 25
lines and the preferred character set is set to ANSI.
Provides compatibility with software designed to
AT 386
drive the AT&T AT 386 terminal.
Provides compatibility with software designed to
ATT4410
drive the AT&T Dataspeed 4410 terminal. Refer to
the section "AT&T 4410 Emulation" on page 88 for
details.
This is an emulation of the SCO UNIX box.
Sco Console
Provides compatibility with software designed for
VT PCTerm
the PC Term mode supported by DEC.
and
VT52 VT100
These emulations enable you to run applications
written for the DEC VT52 and VT100 terminals,
respectively.
This emulation is an enhanced version of the VT100
VT100+
emulation that provides additional functionality
such as colours. It is the same as the VT-UTF8 emu-
lation except that it only supports ASCII characters
0-127 (decimal).
This emulation is based on the VT500 terminal
VT+HP220
series and includes the HP function keys F1 - F8
(not user programmable). The terminal ID is set to
VT220.
and
VT510 7-Bit VT510 8-Bit
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT510 7-Bit
verted to their 7-bit equivalents, whereas
leaves 8-bit codes unchanged. If you are using
Bit
VT200 applications, select
is selected, all 8-bit codes are con-
VT510 7-Bit
VT510 8-
.