HP Neoware e140 - Thin Client User Manual page 96

VT Series Emulations
80 Introduction
This is an emulation of the SCO UNIX box.
Sco Console
Provides compatibility with software designed for
VT PCTerm
the PC Term mode supported by DEC.
and
VT52 VT100
These emulations enable you to run applications
written for the DEC VT52 and VT100 terminals,
respectively.
This emulation is an enhanced version of the VT100
VT100+
emulation that provides additional functionality
such as colours. It is the same as the VT-UTF8 emu-
lation except that it only supports ASCII characters
0-127 (decimal).
This emulation is based on the VT500 terminal
VT+HP220
series and includes the HP function keys F1 - F8
(not user programmable). The terminal ID is set to
VT220.
and
VT510 7-Bit VT510 8-Bit
These emulations enable you to run applications
written for the DEC VT320 terminal, the difference
is in their treatment of 8-bit control codes. When
VT510 7-Bit
verted to their 7-bit equivalents, whereas
leaves 8-bit codes unchanged. If you are using
Bit
VT200 applications, select
This emulation is an enhanced version of the VT100
VT-UTF8
emulation that supports non-English and drawing
characters. It supports localization of the single-byte
and double-byte character sets and all other lan-
guages supported by Windows. Additional func-
tionality, such as colours, is also provided.
is selected, all 8-bit codes are con-
VT510 7-Bit
VT510 8-
.