Status Line Messages; Standard & Extended Status Line - HP Neoware e140 - Thin Client User Manual

Wyse Emulations

Status Line Messages

Standard &
Extended Status
Line
254 Status Line Messages
The status line is divided into two sections. The left section displays
messages relating to the emulation and the right section is used to
display messages from the host. The type of status line displayed is
determined by the setting of the
tings dialog. The
Extended
to the status line but with additional fields for displaying
Standard
information on local editing mode.
The emulation status messages are displayed in one of six or eight
fields along the first section of the status line, depending on whether
the Standard or Extended status line is displayed. The messages and
their meanings are listed below.
Field 1: Indicates the current keyboard mode.
indicates that Caps Lock is on. Press the Caps Lock
CAPS
key to toggle the mode on and off.
indicates that the keyboard is locked. This takes pre-
LOCK
cedence over the
indicates that Num Lock is on. Press the Num Lock
NUM
key to toggle the mode on and off.
Field 2: Indicates the number of the page that is currently dis-
played. No message is displayed when the current page is
0.
Field 3: * indicates that Monitor mode is on. In this mode, received
codes are not actioned but displayed as symbolic represen-
tations.
Field 4: Indicates the current operating mode.
indicates full-duplex mode.
FDX
indicates half-duplex mode.
HDX
option in the
Status line
status line provides similar information
and messages.
CAPS NUM
set-
Wyse