HP Neoware e140 - Thin Client User Manual page 281

Wyse Emulations
column. The default bell column number is 72 in 80 column mode
and 124 in 132 column mode.
Enhance
Factory default: Checked
When this option is checked, TeemTalk will recognize an additional
set of Wyse codes which are not normally supported by specific
non-Wyse terminals.
Answerback
Factory default: Unspecified
This enables you to specify the Answerback string that is sent to the
host in response to an ANSI mode enquiry command. The string
may be up to 30 characters long.
Answerback concealed
Factory default: Unchecked
Checking this option will cause the Answerback string specified in
the text box above to be locked from change and displayed as aster-
isks. Note that unchecking this option will cause the Answerback
string to be deleted.
Answerback mode
Factory default: Unchecked
This option applies to all emulations and specifies whether or not an
answerback message is automatically sent to the host in response to
an ASCII ENQ character.
Send ACK
Factory default: Checked
This option applies to all emulations and specifies whether or not an
ASCII ACK character is sent to the host port after certain com-
mands have been executed.
Setup Options 265