Changing Monitor
Resolution
You can switch the resolution of the VGA output using the
following procedures.
● Press and hold the [FUNCTION] button, and press the
[14/ZOOM OUT] button at the same time.
hPressing the button each time increases the resolution
value.
● Press and hold the [FUNCTION] button, and press the
[15/ZOOM IN] button at the same time.
hPressing the button each time decreases the resolution
value.
:
WARNING
LIVE/BROWSE
OPERATE
ALARM
HDD
SELECT
LOCK
REC CONTROL
PTZ/PRESET
FUNCTION
SERIAL
CANCEL
ZOOM OUT
ZOOM IN
ENTER
[14/ZOOM OUT]
[FUNCTION] Button
Button
[15/ZOOM IN] Button
Memo :
● Selecting a resolution not supported by the monitor may
prevent normal monitor synchronization.
REV
SEARCH
KEY
ALARM CLEAR
REC/STOP
STOP(PB)
PLAY
Precautions when
Changing Settings
Note that any incorrect changes made to the VR-N1600U/E
settings may prevent normal operation.
Before making any changes, save the current settings to
[Flash Memory Utility] (A Page 98) to allow you to restore
the previous settings should anything go wrong.
It is recommended that you save the setting data before
making any changes.
FWD
SKIP