JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 118

Applications
Connecting to a Computer
(continued)
Login to NVR Viewer (Cont'd)
2
Specify your login information in the following
fields
User name: vr-n1600
Password: vr-n1600
Item
A
Server For specifying the IP address and port
number of VR-N1600U/E. (For example,
address
in the case of [http://192.168.1.253:80],
[:80] is the port number.)
The port number is the number as
specified in [Server Configuration] under
[Image Server Setting]. (A Page 67)
B
Authentication For selecting one of the three types of
authentication.
Select Basic authentication .
Windows Windows authentication. Login as the
authentication current Windows user.
(current user)
Windows Windows authentication.
authentication
You can login as a Windows user, but a
user name and password will be
required.
Basic Basic authentication.
authentication
A user name and password will be
required to login to VR-N1600U/E.
C
User name For entering the Windows user name if
you have selected Windows
authentication for the [Authentication]
item B. For entering the user name
registered in the [User Administration]
item under [Image Server Setting]
(A Page 104) if you have selected
Basic authentication .
A
B
C
D
E
F
Description
Item
D
Password For entering the login password for VR-
N1600U/E if you have selected
Windows authentication for the
[Authentication] item B. For entering the
password registered in the [User
Administration] item under [Image
Server Setting] (A Page 104) if you
have selected Basic authentication .
E
Remember Saves the password.
password
If you have selected Windows
authentication or Basic
authentication for the [Authentication]
item B, selecting this check box enables
you to login the next time simply by
clicking the [Connect] button.
F
Auto-login Enables you to login automatically.
Selecting the check box enables you to
log into the [NVR Viewer] automatically.
3
Click the [Connect] button
● The NVR Viewer screen appears after a short while.
Memo :
● If you have previously logged in to the NVR Viewer, a
message will appear asking if you want the view that was
used during the last login to be displayed. (Only when
connecting from a surveillance computer)
[Main View]:
Select this check box to restore the view that you last
used in the main window of the [NVR Viewer].
[Detached Views]:
Select this check box to display the views on the [Primary
Display] screen, multi-monitor, or floating screen.
Note :
● When you log out after reaching the maximum number of
distribution clients, you may need to wait for several
minutes before you can establish the connection again.
● When multiple computers are connected and audio sound
is played back, the sound may be distorted.
Description