Specifying Generic Events - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Applications
Camera Input/Output Port
and Events (continued)

Specifying Generic Events

This section describes procedures for specifying an event for
the TCP/UDP protocols. The event will be triggered if the
received data meets the specified criteria.
1
Click the [Generic Events...] button on the
[Camera Recording Administator] screen
[Camera Recording Administator] Screen
A
B
[Generic Events] Screen
Item
A
Add new For adding new events.
event...
B
Remove For deleting the event selected in the
[Defined events] list.
selected
C
Edit For editing the event selected in the
[Defined events] list.
selected...
[Generic
Events...] Button
C
Description
2
Select Generic and click [Add new event...]
[Add New Event] Screen
A General Event settings
Item
Event Name For specifying a name for the event. Enter a
unique name for the event.
Memo :
● Event names must not contain the
following characters: < > & ' " \ / : * ? | [ ].
Event Protocol For selecting the protocol that VR-N1600U/E
uses to receive data when detecting the
event:
Any Receives and analyzes data that uses either
the TCP or UDP protocol.
TCP Receives and analyzes only data that uses
the TCP protocol.
UDP Receives and analyzes only data that uses
the UDP protocol.
Event rule type For specifying the rules when analyzing the
received data.
Match In order for an event to be triggered, the
received data must totally coincide with the
message specified in the [Event message
include] field of the [Event rules string]
section C, and must not contain any other
messages.
Search n order for an event to be triggered, the
received data must contain the message
specified in the [Event message include] field
of the [Event rules string] section C. Other
messages may be included in the data.
Event priority The same data may be used by different
events. Assigns the order of priority to each
event for determining the event to trigger
when the received data matches the criteria
of multiple events. Set the priority level to a
value between 0 (lowest priority) and
1000 (highest priority).
Memo :
● VR-N1600U/E receives generic events from the port that
is specified in [Alert Port] on the [Advanced] screen.
(A Page 86)
A
B
C
Description