Searching Recorded Image Using Sequence
Sequences refers to sequences of images that are recorded
when an event or motion is detected. Each sequence
contains a list of the recorded images.
1
Double-click the [Sequence] bar on the [Browse]
screen
[Sequence]
Sequence Bar
2
Click [Get Sequence]
● A list of 20 images each prior to and following the
display time appears.
● If the [Preview Image] check box is selected, you are
able to preview the images by placing the mouse
pointer over the sequence in the list.
3
Click a sequence in the list
● Display of all the images in the view changes according
to the date/time of the selected sequence.
Memo :
● Clicking the expand icon [
will show you the exact date and time of the first and last
image in the sequence as well as the exact date and time
of the motion detection or event that triggered the
recording.
Note :
● Depending on [( )seconds pre/post recordings on
motion/event:] (A Page 51), a consecutive number of
sequences may sometimes be integrated into one
sequence.
NVR Viewer
[Browse] Screen
] next to a sequence in the list
Searching Recorded Image from the Alert List
A list of recorded images is displayed for each [Alart], such
as when motion is detected (A Page 92).
1
Double-click the [Alerts] bar on the [Browse]
screen
2
Click [
] on the [Alerts] list and select an event
from the list
● You can select a specific event, camera or [Server].
[Alerts] List
Event List
3
Click the [Get List] button
● A list of detected events appears.
● You can click on the event list to view recorded images
of the selected event.
Memo :
● The Alerts list displays events occurring around the time
(approx. 1 day before and after) set in [Time Navigation].
NVR Viewer
[Browse] Screen