Playing, Skipping And Stopping Recorded Images - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Playing, Skipping and Stopping Recorded Images

Use the [Time Navigation] of the NVR Viewer to perform
playback, stop, and skip operations.
Browse Button
The buttons and sliders have the following functions.
Browse Button
Moves to the previous image of the selected
camera (frame-by-frame reverse playback).
:
Moves to the next image of the selected camera
(frame-by-frame forward playback).
:
Moves to the first image in the previous
sequence of the selected camera. (This function
:
may not work properly if there is no sequences
or for some sequence lengths.)
Moves to the first image in the next sequence of
the selected camera. (This function may not
:
work properly if there is no sequence or for
some sequence lengths.)
Moves to the oldest recorded image of the
selected camera. (This function may not work
:
properly at a playback speed of 10x or higher.)
Moves to the latest recorded image of the
selected camera. (This function may not work
:
properly at a playback speed of 10x or higher.)
Note :
● The browse buttons are only enabled when a camera has
been selected.
● It may take several minutes for moving to complete after
you have pressed the browse buttons
the buttons are clicked continuously before the images are
moved, the selected sequences will be moved collectively.
[Time] Slider
Dragging the slider to the left changes the recording date to
an older date, and dragging the slider to the right changes it
to a more recent date. Use the top slider bar for fine browsing
(x0.4 to x240) within a limited period of time, and use the
bottom bar for easy browsing (x20 to x36,000) for longer
time spans.
NVR Viewer
[Browse] Screen
[Time] Slider
[Playback] Slider
Play Button
. Note that if
[Playback] Slider
The center position is for playback at normal speed (x1).
Drag the slider to the left and right to reduce and increase
the playback speed respectively. Dragging the slider to the
leftmost position pauses playback.
The playback speed is displayed at the top right of the
master time area.
● Play Button
: Plays back images in the reverse direction.
: Plays back images.
: Stops playback.
Note :
● The Playback buttons do not work when the [Playback]
Slider is placed at its leftmost position (paused). Select
the desired speed by moving the [Playback] Slider.
● The angle of the shuttle dial does not affect playback,
which is operated in the [Time Navigation] section using a
mouse.
Memo :
● When Skip gaps during playback of [Time Navigation] is
checked, playback is performed by skipping portions for
which no recorded image is found in the selected camera.
● When the recorded images are played back with some
images skipped, the [SKIP] display will appear in red in
the [Master Time] area for some time.
● During playback, skip playback operations may differ
between a single screen and multiple screens. Even if the
selected camera does not contain any recording, skipping
will not take place as long as recording is found in another
camera. If recorded images are not found, the previously
displayed image appears.