Configuring Event Buttons - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

2
Specify the following items.
Item
A
Ftp Server For specifying the port number to use for
sending event information from the
Port
device to the surveillance system via
FTP.
B
Alert Port For specifying the port number to use for
handling warnings related to events,
including generic events.
C
SMTP Port For specifying the port number to use for
sending event information from the
device to the surveillance system via
SMTP.
D
Polling For some devices, the surveillance
system may need to check the status of
Frequency
their input ports in order to detect
[1/10sec]
whether input has been received. These
regular status checks are called
polling .
The [Polling Frequency[1/10sec]] field
enables you to specify the interval
between status checks. Specify the
interval in units of 1/10 seconds.
Memo :
● For I/O devices, it is highly
recommended that the polling
frequency be shortened as much as
possible.
● Refer to the "Instruction Manual" of
the I/O device for devices that require
polling.

Configuring Event Buttons

Event buttons are used to manually trigger events from the
[Live Viewing] screen.
1
Click the [Event Buttons...] button on the
[Camera Recording Administator] screen
[Camera Recording Administator] Screen
Description
[Event Buttons]
2
Select [Global] (apply to all cameras) or a
specific camera
3
Click [Add new event...] to add the event button
[Add New Event] Screen
Item
A
Button related Displays the camera name for which
the event is specified. (This is a
to
read-only field.)
B
Manual event For specifying a name for the event
button.
name
Memo :
● Event names must not contain the
C
E-Mail settings
Send e-mail if Select this check box to send an e-
this event mail alert when the event button is
occurs clicked.
Include image Select this check box to attach the
from camera currently recorded images to the e-
mail when the event button is
clicked. Select a camera from the
list below the check box.
Memo :
● To specify a timer event for an event, select the event
3
added in Step , and click [Add new event...].
2
3
A
B
C
Description
following characters: < > & ' " \ / : * ? |
[ ].