E Mail Settings - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Applications
General Settings
(continued)
Item
EAdvanced (continued)
Create Select this check box to automatically
default create the online schedule of the
schedule camera in the [Scheduler] at all times.
for new (A Page 47)
cameras
F
Event Do not change.
Recording
Settings
G
Logfile Do not change.
Settings

E mail Settings

G
[E-mal setup] Screen
Description
A
B
C
D
E
F
Item
A
Enable E- Select this check box to enable
sending of e-mail alerts.
mail(Monitor)
B
Recipient(S) For specifying the e-mail addresses to
send alerts to. If you are specifying
more than one e-mail address,
separate the e-mail addresses using
semicolons.
C
Sender For specifying the sender's e-mail
address, outgoing (SMTP) mail server
Settings
name and login settings.
D
Subject text For specifying the mail title.
E
Message text For specifying the message text.
F
Time For specifying the time interval
(minutes) for sending each e-mail
btw.mail(min
alert.
utes)
G
Include Select this check box to include
images in the message.
Image
Memo :
● You can send a test e-mail by clicking the [Test] button. If
the e-mail address of the sender is not registered with the
mail server of the recipient, the [The mail address of the
sender is not valid. ...] message may appear. When this
occurs, double-check the sender's e-mail address and
outgoing mail server, and re-enter the e-mail address.
● E-mail messages are sent in the following cases.
● When an input event occurs
(APage 84 [Specifying an Input Event])
● When the event button is clicked
(APage 87 [Configuring Event Buttons])
● When a generic event occurs
(APage 88 [Specifying Generic Events])
● When motion is detected
(APage 92 [Specifying Motion Detection.])
● When camera failure occurs
● When an archiving error occurs
(APage 95 [Archiving])
● In order to send an e-mail, you need to specify the timing
for sending out e-mails in [Scheduler Setting] (A Page
47).
● After you have completed the e-mail setting, perform a
test to verify that it can be sent successfully.
Description