Getting Started; Features - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Getting Started

Features

Automatic detection of network cameras
Reduces the hassle of complex camera registration
procedures.
Built-in large-capacity hard disk (500 GB)
HDD expansion supported
Addition of up to 500 GB (built-in), 2 TB x 2 units (external.)
RAID1 supported
Supports RAID1 if additional built-in HDD is installed.
Writing the same data to two separate hard disks (mirroring)
to enable normal use if one of the hard disks breaks down.
Simultaneous recording up to 16 channels at 160
ips
Simultaneous recording up to 16 channels at 240 ips is
possible when the NVR Viewer is not started up.
Display/Distribution performance at 80 ips is
guaranteed
Enables simultaneous recording and playback
Playback of recorded images, jog dial playback and skip
playback are possible while recording is in progress.
Direct Search
Enables you to retrieve data of a specific date/time or alarm
position speedily.
Power failure recovery record
If a power failure occurs during recording, the system
resumes recording in the mode selected before the power
failure after recovery.
Alarm recording
Enables recording to start automatically in the alarm
recording mode when alarm signal input is received during
recording.
Motion Detect
Enables recording to start automatically when motion is
detected in the preset live image. You can also specify the
detection area for each camera.
Alarm Mail Notification
Enables notification by e-mails to be sent out when an alarm
or motion is detected.