Camera Input/Output Port And Events; I/O Settings - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Camera Input/Output Port
and Events
The input/output port is the input/output terminal that is found
on each device registered with VR-N1600U/E. You can
register the input port as [Input events], and the output port
as [Outputs...].
A registered input/output port can be linked to an event as
described below. (APage 90 [Specifying an Output Port])
● Events can be used to start recording, send e-mails, move
the PTZ camera to a preset position, and control the
output port of the device. Events are divided into the four
types as described below.
Input events Registers input signals of sensors
connected to the input port of the device
as an [Input events].
Generic events Registers as a generic event.
VMD events Registers the detected image motion as
a VMD (Video Motion Detection) event.
Event buttons Event generated by buttons that enable
manual operation.

I/O Settings

1
Click the [I/O Setup...] button on the [Camera
Record Setting] screen
● The [I/O Setup] screen appears.
● The [I/O Setup] screen enables you to add input
events, VMD events and outputs that can be used by
the network cameras.
A
B
C
[I/O Setup] Screen
Item
A
Add new
event...
B
Add new
output event...
C
Add VMD
Event(motion
Detection)
D
Advanced...
E
Remove
selected
F
Edit
selected...
Note :
● The available events differ among network cameras.
F
E
D
Description
For specifying input events for the
device selected in the [Defined
events] list. You may be able to
specify multiple input events for some
devices.
Click the [ ] mark next to the device
in the [Defined events] list, select the
preset input event, and click the [Add
new event...] button to specify a timer
event. (A Page 85)
Displays the [Add new output] screen.
(A Page 86)
For specifying a VMD (Video Motion
Detection) event for the device
selected in the [Defined events] list.
Only one VMD event can be defined
for each camera.
Note :
● To avoid the risk of generating an
excessive number of VMD events,
a new VMD event cannot occur
within five seconds after the
occurrence of the last VMD event.
● VMD events cannot be sent by e-
mail.
Displays the [Advanced...] screen.
(A Page 86)
For deleting the event selected in the
[Defined events] list.
For editing the event selected in the
[Defined events] list.