Default Value List - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Others

Default Value List

Scheduler [Scheduler Setting] (A Page 47)
Online
Enable speedup
E-mail
Patrolling
Camera Settings [Edit Device...]^[Settings] (A Page 50)
PTZ Camera Section
Some of the connected cameras are Pna/Tilt/Zoom cameras
Camera Type
Camera Settings [Specifying Image Recording Settings] (A Page 49)
Speedup Settings
Frame Rate
Frame/
Recording Settings
Desired framerate
Frame/
Enable speedup
When to store images in database
On motion
On event
( )seconds pre/post recordings on motion/event
Live Settings (A Page 50)
Desired framerate
Same as recording
Same sa speedup
Database Settings [Database Settings] (A Page 96))
Max.records in database
Maxtimespan in database
Archive automatically when database is full
In case of database failure the following action syould be taken
PTZ Preset [Display the PTZ Preset Positions window] (A Page 78)
Presets
Use preset positions from device
Preset Position on Events
Preset Position on Events
PTZ Patrolling Settings [Auto PTZ Patrolling] (A Page 81)
Patrol scheme
PTZ Patrolling Schedule Settings
Stay at each position in the patrol schedule(in seconds)
Time for each PTZ camera movement to complete(in seconds). Motion detection is
disabled during movement.
[ ] : Factory Settings
[Always Online]
[Always Offline]
[Always Offline]
[Always Offline]
[Not Selected]
[Fixed]
[8]
[Sec.] /Min. /Hour
[8]
[Sec.] /Min. /Hour
[Not Selected]
Always /Never /[Conditionally]
[Selected]
[Not Selected]
[Not Selected]
[Selected]
[Selected] [108000]
[Not Selected]
[Selected]
Repair,Scan,Delete if fails /
Repair,Delete if fails /Archive if fails /
Delete(no repair) /Archive(no repair)
[Not Selected]
[Not Selected]
[My patrol sheme]
[5]
[3]