JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual page 20

Getting Started
Part Names and Functions
(continued)
Rear I/O Terminals
Terminal
e[ALARM IN]
f[EMERGENCY]
g[ALARM RESET]
h[EXT REC IN]
j[OPE ON/OFF]
j[REC TALLY]
k[ALARM OUT]
l[WARNING OUT]
m[OPTION OUT1]
[OPTION OUT2]
250 ms and
Make
Memo :
● Set the impedance at the output end to 10kK or below.
Memo :
● Set the impedance at the output end to 10kK or below.
250 ms and
Memo :
● Set the impedance at the output end to 10kK or below.
1 s and above
OPE ON
Memo :
● Set the impedance at the output end to 10kK or below.
Make Output
In Progress
(External Pull-up Level)
The make contact is formed using the individual output terminals and the
COM terminal. Turning off the power of VR-N1600U/E switches the
output of the output terminals to break.
250 ms and
above
Break
250 ms and
Approx.
50 ms
OPE OFF
Break Output In
Progress
Remarks
Make Contact Input
Make Contact Input
Make Contact Input
Make Contact Input
Auto Collector Output
(DC15V, 10 mA and
below)