Clock Display; About Performance Meter; Changing Monitor Resolution; Setting/Canceling Operation Lock - JVC VR-N900U Instructions Manual

Clock Display

The VR-N900U has a clock display function that displays the
current time on the screen.
1
Press the [2/ ] button while holding down the
[FUNCTION] button.
Clock display appears on the screen.
Note
• To turn the clock display off, press the [2/
while holding down the [FUNCTION] button.
• To move the clock display position, left click and drag the
clock display to the desired position.

About Performance Meter

The VR-N900U comes with a performance meter to indicate
VR-N900U operating load.
At high operating loads, the system may not be able to
record at the preset frame rate or operate normally.
1
Press the [1/ ] button while holding down the
[FUNCTION] button.
A performance meter is displayed on the screen.
Load factor less than 5%
Load factor less than 60% Indicated in Green
Load factor less than 90% Indicated in Yellow
Load factor more than 90% Indicated in Red
Note
• The performance meter automatically displays when the
VR-N900U powers up.
• To turn the performance meter off, press the [1/
again while holding down the [FUNCTION] button.
• To move the display position of the performance meter,
left click and drag it to the desired position.
CAUTION
• Do not use the recorder when the performance meter is
indicated in red.
] button again
Indicated in gray
] button

Changing monitor resolution

Press the [ZOOM OUT/CANCEL] or the [ZOOM IN/ENTER]
button while holding down the [FUNCTION] button to
change VGA output resolution.
CAUTION
• Selecting a resolution not supported by the monitor may
prevent normal monitor synchronization.
Setting/Canceling
Operation Lock
The VR-N900U is equipped with an operation lock feature is
to prevent the system from being placed into OPERATE
OFF accidentally and prevent unauthorized recording
operations.

Setting Operation Lock

1
Press the [KEY] button while holding down the
[FUNCTION] button.
Operation will be locked. The [LOCK] indicator lights up
when in operation lock mode.

Canceling Operation Lock

1
(When in operation lock mode) Press the [KEY]
button while holding down the [FUNCTION]
button.
Operation lock will be canceled. The [LOCK] indicator will
turn off.
Keypad [LOCK] indicator
[ZOOM IN/ENTER] button [FUNCTION] button
[KEY] button
7