Listening To Audio Sound - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Basic Operation
Playing Back Recorded
Images via Mouse Control
(continued)

Listening to Audio Sound

To listen to recorded audio sound, select the required audio
source from the [Audio Source] list of the [Audio] section.
To temporarily mute the live audio sound, select the [Mute]
check box.
Select
Note :
● The sound may become distorted when audio is played
back with multiple surveillance computers.
● The audio setting is restored to [No Audio Sources] when
you return from screen display setting to the [Live] or
[Browse] screen. To listen to an audio sound, reselect an
audio source from the [Audio Source] list.
● There will be no audio output during still image playback
or search/frame advance playback except at the speed of
1.
● When a recorded image is played back during recording,
the played back audio sound may be interrupted.
Memo :
● If you have selected an camera that has been set to
record an audio sound, the specified audio sound will be
output.
● If you have selected a camera that is not set to record an
audio sound, the most recently played back audio sound
will be output continuously.
● During simultaneous recording and playback of recorded
images, the playback image may pause and the sound
may be interrupted. (This has no impact on recording to
the system or additional hard disk.)
NVR Viewer
[Browse] Screen