Language Setting - JVC VR-N1600U - 16 Channel Network Video Recorder Instructions Manual

Using the Auto Detect Feature
The Auto Detect feature enables automatic detection of
network cameras.
Memo :
● When multicast packets are configured such that they do
not pass through the network equipment, such as a
switching hub, the Auto Detect of the camera may not
function properly.
The [IP Information] list contains information on the IP
address of the automatically detected camera, MAC
address, number of video CH, manufacturer, and model.
1
Click [Auto Detect]
● Auto Detect starts and the camera image appears on
the screen.
2
Changing the Order of Detected Cameras
● You can sort the order of the detected cameras by
clicking the Sort button.
● The different types of sort buttons include the [IP],
[MAC], [CH], [MAKER], and [MODEL] sort buttons.
● After selecting the detected camera, click the [Up] or
[Down] button to alter the order of the cameras.
● Deselect the check box of any camera that you are not
using.
Memo :
● The camera at the top of the list is used with priority.
3
Click [OK]
● The [Camera Record Setting] screen appears.
4
Click [Close]
● The Default View is automatically created. To save this
view, change its name.
Memo :
● The Default View created by the Auto Detect feature may
change the camera placement in the view. To maintain a
fixed position, name the view and save it.
Note :
● Select Do not detect in the future. check box on the
[Detect Device] screen during the Auto Detect operation if
you do not want the [Detect Device] screen of that camera
to appear during subsequent Auto Detect operations. For
cameras that you have excluded from detection, you can
add (A Page 74) them again manually at a later time.

Language Setting

This option enables you to specify the language you want to
use.
Memo :
● The functions and GUI (graphical user interface) are the
same as the [Selecting a language] (A Page 14) screen
that is displayed when this unit is first switched on.
1
Exit the NVR Viewer
2
Select [Language Setting] from the main menu
● The [Language Setting] screen appears when the NVR
Viewer is switched on for the first time.
3
Select a language
● Click on the [Language Selection] pull-down tab and
select the language you want to use.
4
Click the [OK] button
● Click the [OK] button to enable your selection. The
system will reboot when the language setting is
changed.
[Language Selection] Screen
Note :
● Specify the language settings immediately after VR-
N1600U/E has started up.
● When language setting is complete, the device
automatically reboots. It may take about five minutes to
exit the settings.
● Set the language after shutting down the NVR Viewer.
● Never turn off the power while setting the language.