Table of Contents
Advertisement
f To initialize all the adjustment data, select each item and execute [INITIALIZE] individually.
f When the projector is initialized by one of the following methods, all data in [UPPER FREE SHAPE], [LOWER FREE SHAPE], [LEFT FREE
SHAPE], and [RIGHT FREE SHAPE] are initialized.
g When initialized by selecting the [PROJECTOR SETUP] menu → [INITIALIZE] → [FACTORY RESET]
g When initialized by setting the [PROJECTOR SETUP] menu → [INITIALIZE] → [USER SETTINGS] → [OTHER USER SETTING] to
[INITIALIZE]
[FRAME RESPONSE]
Set the processing method of the image frame delay.
1)
Press as to select [FRAME RESPONSE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[NORMAL]
[FAST]
*1
[FIXED]
*2
*1 [FAST] can be set when the input signal is the interlaced signal
*2 Only when moving image signals and still image signals with the vertical scanning frequency of 50 Hz or 60 Hz are input
Note
f When [FRAME RESPONSE] is set to [FAST], the [DIGITAL CINEMA REALITY] setting becomes disabled and is fixed to [OFF].
[FRAME DELAY]
Set the additional delay time against the frame delay status by the [FRAME RESPONSE] setting.
1)
Press as to select [FRAME DELAY].
2)
Press the <执行> button.
f The [FRAME DELAY] screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[+0.00ms] - [+100.00ms]
f The delay time (approximate) from the point the video signal is input until the image is projected is
displayed in [ACTUAL DELAY] of the [FRAME DELAY] screen.
Note
f When the [PROJECTOR SETUP] menu → [MULTI PROJECTOR SYNC] → [MODE] is set to [SUB], [FRAME DELAY] cannot be set. In such
case, the projector will operate according to the [FRAME DELAY] setting of the projector where the [PROJECTOR SETUP] menu → [MULTI
PROJECTOR SYNC] → [MODE] is set to [MAIN].
[QUAD PIXEL DRIVE]
Enable/disable the QUAD PIXEL DRIVE function to enhance the resolution of the projected image.
1)
Press as to select [QUAD PIXEL DRIVE].
2)
Press qw to switch the item.
f The items will switch each time you press the button.
[ON]
[OFF]
Note
f [QUAD PIXEL DRIVE] is fixed to [ON] in the following cases.
g When the [POSITION] menu → [GEOMETRY] is set to anything other than [OFF]
g When [CUSTOM MASKING] in [BLANKING] is set to anything other than [OFF] ([PC-1], [PC-2], [PC-3])
g When the [DISPLAY OPTION] menu → [SIMUL INPUT SETTING] is set to [AUTO(x2-speed)], and the following image in simultaneous
format is displayed
3840 x 2160/60, 4096 x 2160/60
Chapter 4 Settings — [ADVANCED MENU] menu
Standard setting.
Simplifies the image processing to reduce image frame delay.
Sets image frame delay to be constant regardless of the image position or magnification.
Sets the delay in 0.01 ms increments.
Enables the QUAD PIXEL DRIVE function.
Disables the QUAD PIXEL DRIVE function.
ENGLISH - 123
Advertisement
Table of Contents
