Fax Settings - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

Color Balance (Magenta Low) Displays the color balance level of low density magenta.
Color Balance (Magenta Mid)
Color Balance (Magenta High) Displays the color balance level of high density magenta.
Copy Defaults
Color Balance (Cyan Low)
Color Balance (Cyan Mid)
Color Balance (Cyan High)
Color Balance (Black Low)
Color Balance (Black Mid)
Color Balance (Black High)
Multiple-Up
Collated
Copy Defaults Margin Top/Bottom
Margin Left/Right
Margin Middle

Fax Settings

Purpose:
To display the fax settings of the printer.
Values:
Receive Mode Displays the fax receiving mode.
Auto Rec Fax Displays the interval at which the printer goes into the fax receive mode after receiving an incoming call.
Auto Rec
Displays the interval at which the printer goes into the fax receive mode after the external telephone receives an incoming call.
Fax/Tel
Auto Rec
Displays the interval at which the printer goes into the fax mode after the external answering machine receives an incoming call.
Ans/Fax
Line Monitor Displays the volume of the line monitor, which audibly monitors a transmission through the internal speaker until a connection is made.
Ring Tone Displays the volume of the ring tone, which indicates that an incoming call is a telephone call through the internal speaker when Receive
Volume Mode is set to Telephone/Fax.
Line Type Displays the line type; PSTN or PBX.
Tone/Pulse Displays whether to use tone or pulse dialing.
Resend Delay Displays the interval between transmission attempts.
Redial Attempts Displays the number of redial attempts.
Redial Delay Displays the redial interval.
Junk Fax Setup Displays whether to reject faxes sent from unwanted stations.
Remote Receive Displays whether to receive faxes by pressing a remote receive code on the external telephone.
Remote Rcv
Displays the tone to start Remote Receive.
Tone
Fax Header Displays whether to print the sender's information on the header of faxes.
Fax Header
Displays the sender's name that will be printed on the header of faxes.
Name
Fax Number Displays the fax number of the printer, which will be printed on the header of faxes.
Fax Cover Page Displays whether to attach a cover page to faxes.
DRPD Pattern Displays the Distinctive Ring Pattern Detection (DRPD) setting.
Sent Fax Fwd Displays whether to forward incoming faxes to a specified destination.
Fax Fwd
Displays the fax number of the destination to which incoming faxes are to be forwarded.
Number
Fax Fwd Print Displays whether or not to print incoming faxes that were successfully forwarded.
Fax Fwd Err
Displays whether or not to print incoming faxes that failed to be forwarded.
Print
Prefix Dial Displays whether to set a prefix dial number.
Displays a prefix dial number. This number dials before any auto dial number is started. It is useful for accessing the Private Automatic
Prefix Dial Num
Branch Exchange (PABX).
Discard Size Displays whether to delete text or images at the bottom of a fax page when the entire page does not fit onto the output paper.
ECM Displays whether the Error Correction Mode (ECM) is enabled.
Modem Speed Displays the fax modem speed when a fax transmission or reception error occurs.
Fax Activity Displays whether to automatically print a fax activity report after every 50 incoming and outgoing fax communications.
Fax Transmit Displays whether to print a transmission report after every fax transmission or only when an error occurs.
Fax Broadcast Displays whether to print a transmission report after every fax transmission to multiple destinations or only when an error occurs.
Fax Protocol Displays whether to automatically print a protocol monitor report after every fax transmission or only when an error occurs.
Displays the color balance level of medium density magenta.
Displays the color balance level of low density cyan.
Displays the color balance level of medium density cyan.
Displays the color balance level of high density cyan.
Displays the color balance level of low density black.
Displays the color balance level of medium density black.
Displays the color balance level of high density black.
Displays whether the Multiple-Up feature is enabled.
Displays whether to collate the copy.
Displays the value of the top and bottom margins.
Displays the value of the left and right margins.
Displays the value of the middle margin.