your user login, you can create a password on your User Login Account with the following instructions.
For Microsoft Windows XP and Windows 2000:
1. Click start® Control Panel® User Accounts.
2. Click Change an account.
3. Click Create a password and add in a password for your user login account.
For Windows Vista:
1. Click Start® Control Panel.
2. Click User Accounts and Family Safety.
3. Click User Accounts.
4. Click Create a password and add in a password for your user login account.
For Windows Server 2008:
1. Click Start® Control Panel.
2. Double-click User Accounts.
3. Click Create a password for your account and add in a password for your user login account.
Locating the IP Address of Your Computer
You can locate the IP address of your computer with the following instructions.
1. Click start® Run.
For Windows 2000/Windows Server 2003/Windows Server 2008: Click Start® Run.
For Windows Vista: Click Start® All Programs® Accessories® Run.
2. Type cmd in the text field and click OK. A command prompt window will open.
3. Type ipconfig and press Enter.
4. Note down the IP Address xxx.xxx.xxx.xxx.
Sending an E-Mail with the Scanned Image
To send an e-mail attached with the scanned image from your printer, follow the steps below:
Set E-Mail Alert
l
Register a user
l
Start to send e-mail with the scanned file
l
Setting an E-Mail Alert
1. From the Dell Printer Configuration Web Tool, click E-Mail Alert.
The E-Mail Server Settings page appears.