Printer Settings Report - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

Use the Printer Settings menu to display the Printer Settings Report and to configure the printer settings.
The following tabbed pages are displayed at the top of the right frame.

Printer Settings Report

The Printer Settings Report tab includes the Menu Settings and Reports pages.
Menu Settings
Purpose:
To display the current settings of the operator panel menus.
Values:
Power Saver Timer
Mode 1
Power Saver Timer
Mode 2
Auto Reset
Panel Select Tone
Panel Alert Tone
Machine Ready Tone
System Settings
Copy Job Tone
Non-Copy Job Tone
Fault Tone
Alert Tone
Out of Paper Tone
Low Toner Tone
Auto Clear Alert Tone
Base Tone
All Tones
Time-Out
Panel Language
Auto Log Print
System Settings
Print ID
Print Text
RAM Disk
Substitute Tray
mm / inch
Paper Size
Custom Size - Y
Custom Size - X
Orientation
Font
Symbol Set
Font Size
PCL Settings
Font Pitch
Form Line
Quantity
Hex Dump
Draft Mode
Displays the time for transition to Power Saver Mode 1.
Displays the time for transition to Power Saver Mode 2.
Displays the amount of time before the printer automatically resets the settings on the operator panel to the
defaults when no additional settings are made.
Displays the volume of the tone that is emitted when the operator panel input is correct. Off indicates that the
tone is disabled.
Displays the volume of the tone that is emitted when the operator panel input is incorrect. Off indicates that
the tone is disabled.
Displays the volume of the tone that is emitted when the printer becomes ready. Off indicates that the tone is
disabled.
Displays the volume of the tone that is emitted when a copy job is complete. Off indicates that the tone is
disabled.
Displays the volume of the tone that is emitted when a job other than a copy job is complete. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted when a job ends abnormally. Off indicates that the tone is
disabled.
Displays the volume of the tone that is emitted when a problem occurs. Off indicates that the tone is disabled.
Displays the volume of the tone that is emitted when the printer runs out of paper. Off indicates that the tone
is disabled.
Displays the volume of the tone that is emitted when the toner or some other consumable is low. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted 5 seconds before the printer performs auto clear. Off indicates
that the tone is disabled.
Displays the volume of the tone that is emitted when the operator panel screen is returned to the default
setting by scrolling the loop menu. Off indicates that the tone is disabled.
Displays the volume of all the alert tones. Off indicates that all the tones are disabled.
Displays the amount of time that the printer waits for data to arrive from the computer.
Displays the language that is used on the operator panel screen.
Displays whether or not to automatically print a job history report after every 20 jobs.
Displays where to print a user ID on the output paper.
Displays whether or not the printer outputs PDL (Page Description Language) data (which is not supported by
the printer) as text when the printer receives it
Displays whether or not to allocate RAM for the file system for the Secure Print and Proof Print features. This
item is only available when the 256 MB optional memory card is installed.
Displays if paper of another size has to be used when the paper that is loaded in the specified tray does not
match the paper size setting for the current job.
Displays the measurement unit that is used on the operator panel screen.
Displays the paper size setting.
Displays the length of custom size paper.
Displays the width of custom size paper.
Displays how text and graphics are oriented on the page.
Displays the selected font from the list of registered fonts.
Displays a symbol set for the specified font.
Displays the font size for scalable typographic fonts.
Displays the font pitch for scalable monospaced fonts.
Displays the number of characters in a line.
Displays the number of copies to print.
Displays whether the Hex Dump feature is enabled.
Displays whether or not to print in the draft mode.