Secure Settings - Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual

Initialize NVM
Purpose:
To initialize the non-volatile (NV) memory. After executing this function and rebooting the printer, all the menu parameters are reset to their default values.
Values:
User (Fax) Initializes the fax number entries in the Address Book.
User (Scan) Initializes the e-mail and server address entries in the Address Book.
System Section Initializes the system parameters.
Init Print Meter
Purpose:
To initialize the print meter of the printer. When the print meter is initialized, the meter count is reset to zero.
Non-DELL Toner
Purpose:
To specify whether or not to use another manufacturer's toner cartridge.
NOTICE: Use of a non-Dell toner cartridge may result in some of the printer's functions being unavailable, a reduction in print quality, or deterioration of
the printer's reliability. Use of a new Dell brand toner cartridge is recommended for your printer. The Dell warranty does not cover any problems caused
by the use of any accessory, part, or component that is not supplied by Dell.
Values:
Off* Does not use another manufacturer's toner cartridge.
On Uses another manufacturer's toner cartridge.
Adjust Altitude
Purpose:
To specify the altitude of the location where the printer is installed.
The discharge phenomenon for charging the photo conductor varies with barometric pressure. Adjustments are performed by specifying the altitude of the
location where the printer is being used.
NOTICE: An incorrect altitude adjustment setting leads to poor printing quality, incorrect indication of remaining toner, etc.
Values:
0m*
1000m
Specifies the altitude of the location where the printer is installed.
2000m
3000m

Secure Settings

Use the Secure Settings menu to set a password to limit access to the menus. This prevents items from being changed accidentally.
NOTE: Values marked by an asterisk (*) are the factory default menu settings.
See also:
"Setting Panel Lock"
Panel Lock