Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 64

Medium*
Low Toner
High
Off
Low
Medium
Auto Clear Alert
High
Off*
Low
Medium
Base Tone
High
Off*
Low
Medium*
High
All Tones
Off
Time-Out
Purpose:
To specify the time (in seconds) the printer should wait for data to arrive from the computer. The print job is cancelled if the time-out duration is exceeded.
Values:
30 sec*
Specifies the time the printer should wait for data to arrive from the computer.
5-300 sec
Off Disables the job timeout.
Clock Settings
Purpose:
To specify the date and time formats.
Values:
Set Date Sets the date depending on the Date Format settings.
Set Time Sets the time.
Date Format Sets the date format.
24H* Sets the time in the 24-hour format.
Time Format
12H Sets the time in the 12-hour format.
Time Zone Sets the time zone.
mm/inch
Purpose:
Specifies the default measurement unit displayed after the numeric value on the operator panel.
Values:
mm Selects millimeter as the default measurement unit.
inch Selects inch as the default measurement unit.
NOTE: The default for mm/inch varies depending on other settings, such as Country and Document Size.
NOTE: Restart your printer when you change the settings for the RAM Disk menu.
Auto Log Print
Purpose:
To automatically print a job history report after every 20 jobs.
Emits a tone when toner or some other consumable is low.
Does not emit a tone when toner or some other consumable is low.
Emits a tone 5 seconds before the printer performs auto clear.
Does not emit a tone 5 seconds before the printer performs auto clear.
Emits a tone when the operator panel display is returned to the default setting by scrolling the loop menu.
Does not emit a tone when the operator panel display is returned to the default setting by scrolling the loop menu.
Sets the volume of all the alert tones at once.
Disables all the alert tones.