Dell 2135cn - Multifunction Color Laser Printer Troubleshooting Manual page 234

The Print Server Settings tab includes Basic Information, Port Settings, TCP/IP, E-Mail Alert, SNMP, and Scan To Network pages.
Basic Information
Purpose:
To configure the printer's basic information.
Values:
Printer Name
Location
System Contact Person
Settings
Administrator E-Mail
Address
Asset Tag Number
Auto Refresh
EWS Settings
Auto Refresh Interval
NOTE: The Auto Refresh feature is effective for the contents of the top frame, Printer Status page, Job List page, and Completed Jobs page.
Port Settings
Purpose:
To specify whether to enable or disable printing ports and management protocol features.
Values:
Auto
10BASE-T Half-Duplex
Ethernet
10BASE-T Full-Duplex
Settings
Ethernet 100BASE-TX Half-Duplex
100BASE-TX Full-Duplex
Current Ethernet Settings
MAC Address
LPD Select the check box to enable LPD.
Port9100 Select the check box to enable Port9100.
E-Mail Alert Select the check box to enable the E-Mail Alert feature.
Port
Select the check box to enable the Simple Network Management Protocol (SNMP) agent.
Status
You can also configure the transport protocol to be used. UDP and IPX can be selected simultaneously as the transport
SNMP Agent
protocol.
IPX is only available when the multi-protocol card is installed.
NOTE: The settings in the Port Settings page will be valid only when the printer is rebooted. When you change or configure the settings, click the Apply
New Settings button to apply the new settings.
TCP/IP
Purpose:
To configure the IP address, subnet mask, and gateway address of the printer.
Values:
Host Name
IP Address Mode
Manual IP Address
TCP/IP
Settings
Manual Subnet Mask
Manual Gateway
Address
Specifies the name of the printer using up to 31 alphanumeric characters.
Specifies the location of the printer using up to 63 alphanumeric characters.
Specifies the contact name, number, and other information of the printer's administrator and service center using
up to 63 alphanumeric characters.
Specifies the contact address of the printer's administrator and service center using up to 63 alphanumeric
characters.
Enter the asset tag number for the printer.
Sets whether or not to automatically refresh the contents of the status display pages.
Sets the time interval for refreshing the contents of the status display pages automatically from 15 to 600
seconds.
Detects the Ethernet transmission rate and the duplex settings automatically.
Selects 10Base-T Half-Duplex as the default value.
Selects 10Base-T Full-Duplex as the default value.
Selects 100Base-TX Half-Duplex as the default value.
Selects 100Base-TX Full-Duplex as the default value.
Displays the current settings of the Ethernet.
Displays the printer's MAC address.
Specifies the host name.
Specifies the method for acquiring the IP address.
When an IP address is being set manually, the IP is allocated to the printer using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a gateway address.
When an IP address is being set manually, the subnet mask is specified using the format nnn.nnn.nnn.nnn. Each octet
that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 255. 255.255.255.255 cannot be specified as the
subnet mask.
When an IP address is being set manually, the gateway address is specified using the format nnn.nnn.nnn.nnn. Each
octet that makes up nnn.nnn.nnn.nnn is a value in the range of 0 to 254. 127 and any value in the range of 224 to
254 cannot be specified for the first octet of a gateway address.