Clearing Saved Data (Initialization) - Brother S-7200B Service Manual

3. FUNCTION SETTINGS (OPERATION PANEL)

3-6. Clearing saved data (Initialization)

<Types of data that are cleared>
When saved data is cleared, the following data are returned to factory default settings.
・ All data that has been set using the operation panel (including function setting data)
<Initializing the data>
Initializing all data
1. While pressing the RESET key on the operation panel, turn on the power switch.
The main display will change to orange and "iniT ALL" will be displayed.
2. Press the ENTER key.
Initialization will be carried out and the "iniT ALL" display will change to green.
3. After this, the operation panel and the treadle can be operated. When an operation is carried out, the display will return to
the normal display.
Initializing only speed data
1. While pressing the MAX key on the operation panel, turn on the power switch.
The main display will change to orange and "iniT rPM" will be displayed.
2. Press the ENTER key.
The speed data will be initialized to the speed data from the head detector unit and the "iniT rPM" display will change to
green.
3. After this, the operation panel and the treadle can be operated. When an operation is carried out, the display will return to
the normal display.
Initializing only the function setting data
1. While pressing the FUNC key on the operation panel, turn on the power switch.
The main display will change to orange and "iniT FunC" will be displayed.
2. Press the ENTER key.
Initialization of the function setting data will be carried out and the "iniT FunC" display will change to green.
3. After this, the operation panel and the treadle can be operated. When an operation is carried out, the display will return to
the normal display.
<Clearing data automatically>
When the power is turned on for the first time, the treadle and the operation panel cannot be operated for a period of
approximately 4 seconds.
After approximately 4 seconds, the main display will change to green and "init rPM" will be displayed. "iniT rPM" means that
the sewing machine's speed settings have been initialized.
In addition, this display will also appear in the following cases approximately 4 seconds after the power has been turned on.
・ When the control box has been replaced
・ When a sewing machine with different speed specifications to the control box is connected
NOTE:
When the power switch is turned on, any of the sewing machine's sewing speeds that are different from the setting data in
the head detector unit are reset automatically.
When initialization is complete, the main display will change to green and "init rPM" will be displayed.
After this, the operation panel and the treadle can be operated. When an operation is carried out, the display will return to
the normal display.
21 S-7200B