Resetting The Data (Initialization) - Brother RH-9820 Instruction Manual

7-3. Resetting the data (initialization)

If the sewing machine stops operating normally, the cause may be that an incorrect memory setting may have been made by
means of memory switches, for instance. In such cases, it may be possible to restore normal operation by following the steps
given below to initialize the memory setting data.
1
While pressing the RESET key, push the POWER switch (1) to the ON side.
0449B
2
Select the initialization level (1) from 1 to 3.
0413B
3
[To proceed with initialization]
0415B
4
[To carry out initialization]
5
[To exit initialization mode]
0448B
7. USING THE SEWING MACHINE (OPERATION PANEL: ADVENCED OPERATION)
RH-9820
The mode will switch to initialization
mode.
Level 1 is selected as the default.
* The settings that are reset (initialized) will vary
depending on the initialization level selected. (Refer to
the table on the next page.)
"INITIALIZING" will be displayed and initialization will start.
* If you would like to cancel the initialization procedure,
press the RESET key.
Normal sewing machine operation will then be possible.
0324B
0324B
(1)
0325B
0415B
0311B
62