Data Initialization Method - Brother S-6280A Instruction Manual

3-10. Data initialization method

There are three ways to initialize data:
A:On the Home screen, press and hold the key to initialize the data other than the following to the factory default settings.
P18,P19,P25,P26, P27-N04, P32,P33,P58,P59,P70,P92
Normally, memory switches other than those listed above are initialized to the factory default settings, but memory
switches with default settings that differ from the factory default settings are restored to their factory default settings.
、
※After confirming the value of the memory switch with the key, press and hold the key to set the default value that
is different from the factory setting.
B:In mechanic memory switch mode, select P128, enter the panel version, and press the key to initialize the data other
than the following to the factory default settings.
P18,P19,P25,P26, P27-N04, P32,P33,P58,P59,P70,P92
C:In mechanic memory switch mode, select P70 and press the key to initialize data other than P92 to the factory default
settings.
※Initialization is performed only when the value of P70 is changed. Therefore, after changing to a value other than
the desired value, it is necessary to return to the desired value.
S-6280A
3. Operation panel
24