3. FUNCTION SETTINGS (OPERATION PANEL)
3-4. Setting functions
Selecting the function number
Changing the setting value
(Press for 2 seconds or more)
・ If you depress the treadle before pressing the ENTER key, the main display will return to orange and the setting value
will not be changed.
・ If you change the function number after changing the setting value but before pressing the ENTER key, the setting
value will not be changed.
You need to press the ENTER key for each function number for the setting to be accepted.
・ If the LOCK key icon (1) is on, release the lock before carrying out the following
・ If the MAX key icon (2) is on, press the MAX key to return the main display to stitch
number display (orange).
・ The main display will change to green and function setting
mode will be enabled.
・ Refer to the "Function List" to select the number for the
function that you would like to change the setting for.
・ Refer to the "Function List" to change the setting to a value
within the setting range.
・ The buzzer will sound for approximately 1 second, and then
the setting will be accepted.
・ The main display will return to the stitch number display