Clearing The Memory Data - Brother S-710A Service Manual

18. CLEARING THE MEMORY DATA

Types of data that are cleared
Clearing the memory data returns all of the following data items to the factory default settings.
• Panel settings
• Memory switch settings
• Parameter settings
• Speed settings
• Lower thread counter data
Forced clearing method
While holding down the half stitch key, turn on the power.
The memory data will be cleared, and the power indicator on the operation panel will illuminate and "CL" will appear in
the LED display. After this both will start flashing. In addition, the buzzer will sound continuously.
(After this, carry out the "Confirming the clear" below.)
Automatic clearing
If the sewing machine's computer judges that the memory data is corrupted when the power is turned on, the memory
data will be cleared automatically.
In this case, the power indicator on the operation panel will illuminate and "CL" will appear in the LED display. After this
both will start flashing. In addition, the buzzer will sound continuously.
(If the sewing machine has done this, carry out the "Confirming the clear" below.)
Confirming the clear
If "CL" is flashing in the LED display of the operation panel and the buzzer is sounding continuously, press the half stitch
key. The buzzer will stop sounding and the sewing machine can then be used.
18. CLEARING THE MEMORY DATA
SL-710A
102